ECU TECHNICAL RESOURCES / MODELS · WIRING · SOFTWARE
ECU Technical Resource Centre
Find ECU input/output information, wiring definitions, sensor calibration, software connections and troubleshooting by model and series.
Technical notes & wiring
Link G4+: Monsoon, Fury and Xtreme compared
Compare G4+ Monsoon, Fury and Xtreme I/O, wideband, throttle and CAN configurations.
Updated
Read technical notesTechnical notes & wiring
Link G4+ Monsoon: wiring and channel allocation
Link G4+ Monsoon electrical specifications, channel allocation, shared pins, sensor connections and PCLink setup.
Updated
Read technical notesTechnical notes & wiring
Link G4+ Fury: wiring and channel allocation
Link G4+ Fury electrical specifications, channel allocation, shared pins, sensor connections and PCLink setup.
Updated
Read technical notesTechnical notes & wiring
Link G4+ Xtreme: wiring and channel allocation
Link G4+ Xtreme electrical specifications, channel allocation, shared pins, sensor connections and PCLink setup.
Updated
Read technical notesTechnical notes & wiring
Haltech Sprint 500: I/O, power and startup
Sprint 500 high-impedance injector drivers, ignition outputs, supply range, load calibration and first-start checks.
Updated
Read technical notesTechnical notes & wiring
Haltech Sport 1000 / 2000: channels and shared pins
Sport 1000 and 2000 electrical data, shared output pins and ECU Manager startup checks.
Updated
Read technical notesTechnical guide
Standalone ECU vs. Piggyback Controller
Start with the control strategy, then work through the wiring, signals and tuning requirements.
Updated
Read GuideTechnical guide
ECU system architecture: control, measurement and actuation
Connect ECU power, sensors, actuators, CAN and tuning interfaces into a complete engine-control system.
Updated
Read GuideTechnical guide
Matching engine and ECU: signals and drivers
Check engine triggers, injector impedance, ignition drivers, throttle and factory network functions.
Updated
Read GuideTechnical guide
How to Choose an ECU Harness
Match the revision, connector, pinout and installation scope before choosing a harness.
Updated
Read GuideTechnical guide
MAP Pressure: Absolute vs. Gauge
Understand the pressure reference before comparing a sensor rating with a boost target.
Updated
Read GuideTechnical guide
Before You Choose a Tuning Cable
A matching connector is only the beginning. Check protocol, voltage, driver and software too.
Updated
Read GuidePRODUCTS / SALES SUPPORT
Need a different manual or software version?
Share the exact controller, hardware revision and computer system so the applicable reference can be checked.